Just hoping in case someone is searching that this will be of use.

But that's the stuff I've used for years and usually works good for me.Ĭooler Master MB511 case with 6 120mm fans I know some here say there's newer stuff that's good, so with the same setup you guys might get a better result. My cinebench score was 3563 in case anyone is wondering.įor full disclosure, the thermal paste I'm using on the wraith prism is Arctic Silver 5. But after the test quickly dropped back to mid to low 30s. After 15 passes in a row, my temps did hit 72. Just to note, I redid the test and told Intel Burn test to run 15 passes instead of 10.

Be aware if you use the switch, there is a noticeable difference in how loud your cooler is. I may still grab a hyper 212 cooler, who knows. Under full load, which was basically running Intel Burn test for 10 passes, the CPU got to just under 72C. Note that I'm not using a fan controller and j have the CPU fan set to run 100% in bios at all times.

My idle temps according to Ryzen Master are going as low as 28.4 C. I have 3 fans for intake in front, 2 on top that I use for exhaust, and one in the back that I use for exhaust. Keep in mind, I have the cooler master mb511 case. If you have the cooler mounted with the AMD logo on the top left side, the switch is on the bottom of the cooler on the right. However was getting slightly higher temps on my Rythan I would like.įound by some checking online however that the wraith prism and I'm going to surmise the wraith max, apparently have a fan switch that is located on the bottom right side of the cooler. But I'd purchased a wraith prism cooler as I thought the rgb would look cool etc. I was not until tonight as I've been pondering adding a different cooler to my system.

Ryzen wraith prism cooler rgb control